Home > News > Content

Film Tapes In The Use Of The Process, Should Pay Attention To What Matters?

Aug 04, 2017

Film Tapes in the use of the process, should pay attention to what matters?
1, Film Tapes should be deposited into the Treasury, to avoid the sun, rain; prohibited with acid and alkali oil organic solvent contact, keep clean and dry, from the discovery device 1m outside the room temperature between -15 ℃ ~ 40 ℃.
2, the Film Tapes should be placed in volume, not folded, storage time should be repeated for a long time once.
3, loading and unloading conveyor belt is best to use the crane, and with a rigging rope with a smooth lifting, to avoid damage with the edge, not arrogant loading and unloading, causing loose roll sets.
4, the type of Film Tapes, specifications should be based on the use of specific conditions and reasonable selection.
5, not to different varieties, different specifications models, strength, cloth number of Film Tapes connection (with group) together to use.
6, the conveyor belt is best to use hot vulcanized adhesive, in order to improve reliability, maintain a high effective strength.
7, conveyor conveyor roller diameter and conveyor belt with the minimum diameter should be consistent with the relevant provisions.
8, do not make the Film Tapes snake or creep, to keep the roll, vertical roller flexibility, tension to moderate.
9, the conveyor is equipped with baffle and install a clean device, should avoid wear on the Film Tapes.
10, cleanliness is the basic conditions for good operation of the Film Tapes, foreign matter will affect the belt eccentric, tension differences, and even broken.
11, the use of Film Tapes found early damage phenomenon, it should promptly find the reasons, repair, to avoid the emergence of adverse consequences.
There are many types of Film Tapes, and the surface of the adhesive also have a variety of, so a variety of brands of Film Tapes performance and strength of the different, so when buying the Film Tapes need to consider the following factors:
Microboss of the desired adhesive:
Due to the role of the adhesive Film Tapes is due to the adhesive in the Film Tapes surface of the adhesive in the Film Tapes after the glue into the adhesive quickly dry and make the Film Tapes become part of the adhesive, so the surface of the stickers Pore for the choice of Film Tapes is very important, if the microporous microporous more moisture absorption capacity, it must use the adhesive quickly clotted Film Tapes, otherwise with the slower condensation of the Film Tapes or more adhesive Film Tapes. The same time as
Film Tapes surface adhesive:
Film Tapes in the manufacturer in the bottom coated with adhesive, usually to fully [1] dry after finishing in the volume, if the adhesive Film Tapes is too wet, the Film Tapes itself will be very tight together, when used is difficult to open, there are Can not be used at all.
Ordinary Film Tapes, also known as re-wet type Film Tapes referred to as Film Tapes. It is coated with a layer of water activated adhesive on different substrates. When used in the glue coated with a layer of water, dissolve the adhesive and produce adhesive force, you can paste the adhesive. The substrate is paper, cloth, fiber reinforced paper, composite materials and so on. It is mainly used to seal the joints between the central and the box ends of the cartons. Adhesive Film Tapes, generally can be divided into the initial adhesive force and lasting adhesive force, there is no two kinds of adhesive force are strong Film Tapes, often the initial strength of the frog strong adhesion lasting urging, and vice versa?
① initial adhesive force. The initial adhesive force is the adhesive Film Tapes attached to the corrugated box. In order to close the lid of the carton, especially in the automatic sealing machine under high-speed operation conditions, require a strong initial adhesive Film Tapes.
② lasting adhesive force. Persistent adhesive force is the Film Tapes paste, after a period of time, the adhesive end with the curing of the adhesive force. If this adhesive force is not large enough, the stove paper reed in the transport process will appear brake phenomenon.